Publicidad
Idiomas disponibles
Idiomas disponibles
4) Pour water into the tank
Fill the tank with the correct amount of water and detergent according to the
conditions of the task.
• The water temperature should not exceed 50°C.
• Do not pour strongly acidic or strongly alkaline liquids into the water to deal with
stubborn dirt, it may damage the elements of the water circuit of the machine. If
these liquids are needed, they should be sprayed directly on the floor.
• Detergents poured into the solution tank should be neutral detergents with a pH
of 5-9.
3.3. Working with the device
1)
Handle adjustment
Adjust the handle of the machine so that the operator can stand upright and both
hands are slightly bent while working. Shake the control handle vertically to check
that it is properly mounted.
2)
Connection to the power supply
Make sure that the power supply matches the rating plate, connect the power
cord to the socket on the side of the machine and then to the electrical outlet.
3)
Starting the machine
Press the safety button and then press the start buttons to start cleaning.
Publicidad
