Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION TIPS
Helpful Hints For Easy Installation
Read all instructions before beginning installation.
Be sure the floor is level within 1/8-in (3 mm).
Install vent pipe seal with flange side of seal on outside of lid.
Use soapy water to lubricate all seals to aid installation.
Install rubber coupling/union in vent line to aid disassembly.
Do not over torque toilet mounting screws.
Do not use an automatic plumbing vent device.
Obtain model number and date code, and record information in the space provided on the front of
this manual. Refer to this information when calling factory.
Do's And Don'ts For Installing A Unit
DO read all installation material with the unit.
DO inspect unit for any visible damage caused by shipping. Contact dealer if unit appears to be
damaged.
DO clean all visible debris from the unit.
DO always disconnect pump from power source before handling. DO always connect to a separately
protected and properly grounded ground fault protected circuit. DO NOT ever cut, splice or damage
power cord. DO NOT carry or lift pump by its power cord. DO NOT use an extension cord.
DO install a ball or gate valve and a union in the discharge line downstream of the check valve.
DO test pump immediately after installation to be sure that the system is working properly.
DO review all applicable local and national codes and verify that the installation conforms to each of
them.
We DO NOT recommend this product be connected to utilities other than those found in a normal
bathroom application. Washing machines and dishwashers are examples of equipment that we Do
Not recommend.
DO inspect and test system for proper operations at least every 3 months.
DIMENSIONS
7
Publicidad
