Shure AD4Q Manual De Instrucciones página 9

⑧ Balanced XLR Audio Output (one per channel)
◦ Transformer Balanced
◦ Connect to a mic or line level input. Output 3 and Output 4 carry AES3 signals when enabled. XLR Outputs 1 and 2 are di­
sabled when AES3 is enabled.
⑨ Mic/Line Switch and Ground Lift Switch (one per channel)
◦ Mic/Line: Applies a 30 dB pad in mic position.
◦ Ground Lift: Lifts the ground from pin 1 of the XLR connector and the sleeve of the ¼" Audio Output
⑩ ¼" Audio Output (one per channel)
Transformer Balanced
⑪ Coaxial inputs from Antenna A and Antenna B
RF Connection for Antenna A and Antenna B.
⑫ RF Cascade Connectors C and D
Passes the RF signal from Antenna A and Antenna B to one additional receiver. In Quadversity mode, use these connectors
for additional antenna inputs.
⑬ Antenna Bias Indicator LED
◦ Green: Antenna bias enabled
◦ Red: Antenna fault
◦ Off: Antenna bias disabled
⑭ Quadversity Indicator LED
Illuminates when the receiver is configured for Quadversity mode.
Menús y configuración
El receptor usa una estructura de menú de dos niveles para admitir múltiples canales en un solo espacio de rack:
• Menú de configuración del dispositivo: Los artículos de este menú afectan el rendimiento general del receptor y aplican a
todos los canales globalmente
• Menús de configuración de canales: Cada canal tiene su propio menú permitiendo una configuración independiente de
los canales
Shure Incorporated
9/44