Imit SILVER CR S Manual Del Usuario página 15

BATTERY PLACEMENT
Before starting, power off the device connected to the Room Thermostat and make
sure that the energy is cut off.
As shown in the picture above, press the screwdriver forward from the space shown,
bend the tabs and separate the front cover. Insert 2 new AAA alkaline batteries in the
battery housing with the correct battery direction. Replace both batteries at the same
time. Then align the front part of your Room Thermostat to the back and squeeze it
towards the back.
Low Battery Warning: When the " " icon appears on the screen, it means "low battery
warning". It is recommended to replace the batteries when this warning appears.
Warning: When the product is not used for a long period (more than 15 days), remove
the batteries. Otherwise, malfunctions that may occur would be out of warranty.
Please throw your dead batteries into the waste bin for batteries.