Hedson IRT-System IRT-301 Manual De Instrucciones página 4

4. Assembly instructions
IRT-301, IRT-302
4.1. Begin by screwing the wheels into the base. Position
the lockable wheel at the back. Screw the control
column socket into the base.
Note! For the time being, tighten only by hand. To
facilitate assembly, actuate the brake on the braked
wheel.
4.2. Place the control column in the control column
socket. Tighten all the screws. Fit the handle.
4.3. Fit the supporting arm and the round plates into the
control column, lower arm first. The parallel arm in
the raised position.After a period of use it may be
necessary to re-tighten the four bolts of the parallel
arm.
4
IRT-301, 302, 230 V, 400 V, 1 Ph, 3 Ph
Cable backwards
M8x65 (2x)
M10x130
Large washer
M10x70
M12x65 (2x)
13 16 18
Tools
M10x40 (8x)