Descargar Imprimir esta página

Husky HY120 Manual Del Usuario página 4

Ocultar thumbs Ver también para HY120:

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INFORMATION
Save these instructions
Household use only
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an electrical short circuit, the grounding reduces the risk of
electric shock by providing an escape wire for the electric current. This product is equipped with a cord having
a grounding wire with an appropriate grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances. WARNING – Improper installation of
the grounding plug is able to result in a risk of electric shock. When repair or replacement of the cord or plug is
required, do not connect the grounding wire to either flat blade terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is the grounding wire.
Check with a qualified electrician or serviceman when the grounding instructions are not completely
understood, or when in doubt as to whether the product is properly grounded. Do not modify the plug
provided; if it does not fit the outlet, have the proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug similar to the plug illustrated below.
Only connect the product to an outlet having the same configuration as the plug. Do not use an adapter with
this product.
Extension Cords
If an extension cord must be used, use only a 3-wire extension cord that has a 3-blade grounding plug, and a
3-slot receptacle that accepts the plug on the product. Make sure your extension cord is not damaged. When
using an extension cord, be sure to use one heavy enough to carry the current your product draws. For
lengths less than 50 feet, 18 AWG extension cords shall be used.
 
 
 
 
 
 
 

Publicidad

loading