Selco RI XP Instrucciones De Uso página 20

6 CONFIGURING THE INTERFACE
You must reconfigure the interface if you want to assign it a different IP address.
6.1 Configuring the browser
- Open the web browser (typically Microsoft Internet Explorer)
20
- Select "Use the following IP address"
- In the "IP address" field, enter a value that differs from that of the
interface only in its last digit (e.g. 172.18.1.101).
- In the "Subnet mask" and "Default gateway" fields, enter the
weld@net interface's default values (subnet mask default
255.255.0.0)
- Click "OK" to close all the windows
- From the "Tools" menu, select "Internet options".
- On the "Connections" tab, select "LAN settings",
then click "Advanced" in the window that appears