Bresser TNS2 Instrucciones De Uso página 14

WIFI:
WIFI On or off.
The default value is off.
System:
RES: Reset
UPGR: Update
UPGR:
Connect the unit to the computer
via USB at start-up, copy the
upgrade file config.txt to the unit's
SD card, then disconnect the USB
connection, open the menu, press
the up [
System
select the "Firmware Upgrade"
option, press the [
the upgrade. If it is not successful,
please repeat the upgrade steps,
reboot the unit, connect the unit to
the computer via USB and delete
the upgrade file.
Remember: The upgrade file cannot
be renamed and the file extension
cannot be changed, otherwise the
upgrade will fail!
] or down [ ] key to
] to perform
TECHNICAL DATA
Probe type
Resolution ratio
LCD resolution
Focus length
Eyepiece
Field angle
Digital zoom
Detection range
Wavelength coverage
Frame rate of thermal
images
Color palette
Focusing mode
Image storage
Battery
USB
Working time
Work temperature
Storage temperature
Product size
Product weight
14
Uncooled focal plane
384x288 infrared focal
plane
720X540
19mm; 25mm; 35mm
Single eyepiece display
(the dioptric
compensation is
adjustable)
19.5°x14.7°;
14.9°x11.2°; 10.7°x 8°
2X; 4X
up to 900 m
8μm-14μm
50Hz
Rainbow/iron
oxide red/white
heat/black heat
Adjustable
BMP
Built-in rechargeable
batteries
Micro USB
≥15 hours
0 °C to 45 °C
-20 °C to 60 °C
186x69x68 mm
440g