Descargar Imprimir esta página

DIETZ REHA Produkte TSE000109 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 4
EN
1
General instructions
1.1
Introduction
These operating instructions contain information on how to
use the raised toilet seat safely and properly.
Read the operating instructions thoroughly prior to the use
of the raised toilet seat and follow all instructions.
Keep all documents in a safe place.
1.2
Proper use
The raised toilet seat is used exclusively to raise the toilet
seat and is therefore intended to be fitted to a toilet bowl.
Any other form of use is not permitted.
1.3
Disposal
Old appliances and packaging must be disposed of and
recycled in accordance with the valid national regulations.
1.4
CE mark
The product complies with the medical products directive
93/42/EEC.
1.5
Reuse
The product is suitable for reuse. The amount of reuse
depends on the condition of the product in question.
Prior to reuse, follow the manufacturer's reconditioning and
hygiene guidelines, and check the technical and functional
safety of the product as well.
1.6
Service life
The product is designed for a service life of at least 5 years,
provided that it is used in accordance with its intended use
and that all cleaning and safety instructions are observed.
This service life can be exceeded if the product is carefully
handled, cared for, and used.
2
Safety instructions
Do not overload the raised toilet seat (max. load: 130 kg).
In the case of a wall-mounted toilet bowl, do not exceed the
permissible load weight of the toilet bowl.
Make sure that the raised toilet seat and buttocks are dry
before going to the toilet.
In the case of the model with armrests: distribute the weight
evenly on armrests. Do not load armrests with the entire
body weight.
Do not use the raised toilet seat if the seat support is dam-
aged.
Make sure that the front height adjustment rod has engaged
and that the rear height adjustment rod is fastened with the
screws.
Make sure that the raised toilet seat is fastened to the toilet
bowl by the screws.
Do not expose raised toilet seat to temperatures above
+85 °C.
Check the product periodically for damage and safe assem-
bly.
3
Description
The raised toilet seat is available in the following versions:
With armrest (Fig. 1)
Without armrest (Fig. 2)
3.1
Technical data
Refer to "Technical data" at the end of the operating instruc-
tions.
3.2
Adjusting the seat height
1.
Depending on the desired seat height, install front
height adjustment rod in position A, B, or C (refer to
Fig. 3, 4, 5).
2.
Release 4 screws at the rear height adjustment rod
(refer to Fig. 6).
3.
Insert the rear height adjustment rod consistently (refer
to Fig. 6).
4.
Tighten 4 screws by hand (refer to Fig. 6).
3.3
Attaching the raised toilet seat
1.
Move rods for quick lock (1, Fig. 7) into right position,
such that the rods can be guided through the holes in
the toilet bowl.
2.
Put the raised toilet seat onto the toilet bowl. While
doing this, guide the rods through the holes.
3.
Compress bottom end of the quick locks (2, Fig. 7) and
push them onto the rods until they are in contact with
the toilet bowl.
4.
Release the bottom end of the quick lock, push the
quick lock upwards and, then, tighten it by hand
(Fig. 7).
5.
In the case of the model with armrests: push armrests
onto the holding pipes. Make sure that the spring
catches engage.
3.4
Removing the raised toilet seat
1.
Release quick lock and, then, compress the top end
and pull quick lock downwards.
2.
Pull quick lock off from the rod and remove raised toilet
seat.
3.5
Removing toilet seat and lid
1.
Fold toilet seat and lid upwards to 45° and pull off
evenly upwards.
3.6
Removing the armrests
1.
Fold armrests upwards to 90°.
The armrest unlock automatically.
2.
Pull armrest off from the holding pipe.
4
Maintenance and care
The product can be cleaned and disinfected with customary
agents. Do not use any cleaning agents containing solvents.
Use disinfectant if necessary, as well as in the event of
application for more than one person. Follow the disinfect-
ant manufacturer's instructions.
When adhering to the specified cleaning and safety instruc-
tions, the product is maintenance-free.
After cleaning, dry off the raised toilet seat with a clean
cloth.
Have any necessary repairs done by am authorised special-
ist workshop.
3/8

Publicidad

loading