represent the danger of death
from electric shock.
Do not attempt to repair the
product yourself or replace the
tube. If the mains power cable
of the product is damaged, it has
to be replaced by the manufac-
turer or its service department
or a similarly qualified person in
order to avoid hazards.
The product, including the tube,
does not contain any parts which
can be serviced by the user.
It is essential that the product
does not come into contact with
water or other liquids.
Never touch the mains plug with
damp or wet hands.
Protect the mains lead against
sharp edges, mechanical stresses
and hot surfaces.
CAUTION! ELECTRICAL
SHOCK! Do not touch
the high-voltage grille while the
product is in operation. A small
residual charge still exists a few
minutes after the product has
been switched off.
Never use the product in the
immediate vicinity of a bathtub,
shower or swimming pool.
Avoid the danger
of fire and injury!
Do not place the product on
inflammable surfaces.
Do not use the product in rooms
in which there is a danger of fire,
e.g. rooms in which flammable
or explosive vapours or dusts
might be present (e.g. in stables,
barns or paint shops).
DANGER OF
EXPLOSION! As the
product generates heat, its use
in the surroundings of all highly
inflammable or explosive liquids
or gases is prohibited.
For model HG08724B: the
product will continue to draw a
minimal amount of power when
switched off whilst plugged into
the socket. Unplug the mains
plug from the mains socket to
completely disconnect from
power.
Mounting on a wall
(for model HG08724B only)
Use the screws
and dowels
8
mounting installation.
Measure up the wall or mounting surface for
drilling the holes. Use a spirit level to improve
accuracy.
Mark the two mounting holes
approx. 204 mm apart.
for wall
9
a distance of
7
GB/IE
15