2.
Insert the locking pin to secure the Nutsert on the Transducer. The pin
can be inserted from either sides and until the middle of the FCT is
reached. A haptic feedback is provided when the locking pin is
centered in the correct position.
NOTICE! The Locking pin should be mounted
without excessive force.
3.
Cover up the locking pin housing with the blind plugs:
4.
Turn the Oil bath to align the Desoutter logo with the connector and mount the three M5 screws using a Hex
Allen Key 3 mm to secure the oil bath:
09/2020
13 / 216
Product Instructions