STAMONY ST-ES-500B Manual De Instrucciones página 14

impaired mental, sensory and intellectual functions. Ensure that the power supply
to the unit corresponds to that specified on the identification plate!
ASSEMBLY OF THE UNIT
The unit has mounting holes in the back wall, which allows to fix it to a wall or to
the ground. Mounting is done with the use of raw plugs.
3.3. Working with the unit
3.3.1 OPENING THE SAFE WITH A KEY, CLOSING IT
a) To open the safe, place the emergency key between the door knob and the lock
button panel.
The lock hole is located under the cap. Then turn the supplied key
counterclockwise and the door knob clockwise.
b) Closing the door of the safe and turning the door knob counterclockwise will lock
the safe.
CAUTION!
If the combination is missing and/or the battery is dead, the unit cannot be
opened!
3.3.2 BATTERY INSTALLATION, PROGRAMMING AND CHANGING THE
COMBINATION
a) To install the power supply remove the battery compartment cover on the inside
of the door and insert batteries (4x 1.5V AA).
Cover the hole.
b) Programming of the combination is done with the safe door open.
Press the red button, located on the inside of the door, by the battery
compartment.
A yellow indicator light will illuminate on the control panel. Within 30 seconds,
enter the code and confirm it using button "A" or "B". Determine the digit string
using the lock button panel.
c) To change the safe's code, repeat the steps required to program the
combination.
Never store emergency keys inside the safe!