Problem
Potential cause
Burner and burner
Flame flashback.
tubes are blocked.
Fat accumulation.
Flare up.
Excess fat in the meat.
Temperature too high.
Some gas dealers
Gas bottle can-
have older fill nozzles
not be filled.
with worn threads.
A burner does not
Fat accumulation or
go on through the
food debris at the end
other burners either.
of the mesh tube.
Prevention/solution
Turn the gas regulator to
the "OFF" position and turn
off the gas cylinder shut-off
valve. Clean burner and/
or burner tubes. See the
"Cleaning and Care" section.
Clean the burners and
the inside of the grill.
Remove the fat from the
meat before grilling.
Turn the gas regulator down.
Change your gas dealer.
Clean the mesh tube
with a wire brush.
EN
29