hillvert HT-AF-30 Manual De Instrucciones página 24

a) Slide the first filter (A) onto the active carbon filter.
b) Align the axes of the holes of the fan mounting brackets (1) with the axes of the
holes of the connection plates. Attach the structure with the dedicated
fasteners (included in the set) (B).
c) Install an active carbon filter (2) (C) in the airflow inlet of the fan (1).
d) Install a fan hose (3) (C) in the airflow outlet of the fan (1).
e) ATTENTION: The connections of the fan (1) and the elements of the set (2, 3)
must be properly sealed! Sealing elements (clamp, tape) should be selected
individually, in accordance with the regulations in force in a given country.
f) To connect the fan (1) with the hose (3), use a metal clamp or a suitable type of
securing tape.
g) Use a suitable type of securing tape to connect the fan (1) to the carbon filter
(2).
h) CAUTION! Failure to seal the elements on the fan will lead to air leakage and
therefore improper ventilation circulation!
i) The device prepared in this way should be installed in the place of service as
desired by the user. Fasten it to the working surface with mounting screws in
accordance with the distance of the holes of the connection plates. Mounting