Schumacher Electric MC-1 Manual Del Usuario página 5

2
VOLTAGE SELECTOR SWITCH
Use this switch to select the correct voltage of the battery you are charging
(6 or 12V).
CIRCUIT BREAKER
This charger is equipped with an internal self-resetting circuit breaker. The breaker
protects the charger from temporary overloads. In the event of an overload, the
breaker will trip open and after a short cooling off period, will reset automatically.
This process is known as cycling and can be recognized by an audible clicking
sound. If the circuit breaker is cycling, see the TROUBLESHOOTING section.
GROUNDING AND AC POWER CORD CONNECTIONS
This battery charger is for use on a nominal 120 volt circuit. The plug must be
plugged into an outlet that is properly installed and grounded in accordance with
all local codes and ordinances. The plug pins must fit the receptacle (outlet). Do
not use with an ungrounded system. NOTE: Pursuant to Canadian Regulations,
use of an adapter plug is not allowed in Canada. Use of an adapter plug in the
United States is not recommended and should not be used.
USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an
extension cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger, as
specified below:
Length of cord (feet):
AWG* size of cord:
*AWG-American Wire Gauge
FEATURES
1
1. Ring connectors (quick-connect)
2. Battery clamps (quick-connect)
3. Voltage selector switch
3
25 50 100
18 18 16
• 5 •
150
16