Metra 99-7817HG Instrucciones De Instalación página 3

1. Attach the radio brackets to the
radio trim panel using the (4) #8 x 3/8"
Phillips screws provided. (Figure A)
2. Secure the pocket to the radio brackets
using the (4) #8 x 3/8" Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/panel
assembly from the back, and secure
it using the screws supplied with the
radio. (Figure C)
KIT ASSEMBLY
(Figure A)
(Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess. Test the radio for
proper operation.
6. Secure the completed assembly into the
dash using the factory screws.
7. Reassemble the dash in the reverse
order of disassembly.
(Figure C)
REV. 4/19/2022 INST99-7817HG
3