GGP ITALY SHT 500 Manual De Instrucciones página 21

SAFETY WARNINGS
the power tool accidentally.
d) Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment
or obstruction of moving parts, breakage of
parts and any other condition that may affect
the power tool's operation. If damaged, have
the power tool repaired before use. Many acci-
dents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to become jammed and are easier
to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
ta king into account the working conditions
and the work to be performed. Using the power
tool for operations other than those intended could
result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified
re pair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
ELECTRIC HEDGE TRIMMER
SAFETY WAR NINGS
WARNING!
observed during machine use. Before starting the
machine, read the instructions regarding per sonal
safety and the safety of unauthorized persons.
Keep the instructions in a good state for future
use.
– Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold ma-
terial to be cut when blades are moving. Make
sure the switch is off when clearing jammed ma-
terial. A moment of inattention while operating the
hedge trimmer may result in serious personal injury.
– Carry the hedge trimmer by the handle with
the cutter blade stopped. When transporting
or storing the hedge trimmer always fit the
cutting device guard. Proper handling of the hedge
trimmer will reduce possible personal injury from
the cutter blades.
– Hold the power tool by insulated gripping sur-
faces only, because the cutter blade may come
in contact hidden wiring or its own cord. Cutter
blades contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give
the operator an electric shock.
– Keep cable away from cutting area. During oper-
ation the cable may be hidden in shrubs and can be
The safety rules must be
accidentally cut by the blade.
• How to use the electric hedge trimmer
When using the machine, always use caution and take
on a firm and well-balanced position.
– Where possible, avoid working on wet, slippery
ground or in any case on uneven or steep ground
that does not guarantee stability for the operator.
– Never run, but walk carefully paying attention to the
lay of the land and any eventual obstacles.
– Assess the potential risks of the ground to be mown
and take all necessary precautions to en sure your
own safety, especially on slopes or on bumpy,
slippery or unstable ground.
Do not use the machine if you are unable to hold it
with both hands or keep it steady on your legs while
working.
Never allow children or persons unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of the user.
The machine must never be used by more than one
person.
Never use the machine:
– when people, especially children or pets are in the
vicinity;
– if the user is tired or unwell, or has taken medicine,
drugs, alcohol or any substances which may slow
his reflexes and compromise his judgement;
– if the guards are damaged or have been removed.
• Techniques for using the electric hedge
trimmer
Always observe the safety regulations and use the
most suitable cutting techniques (see chapter 7 for
in structions and examples).
• Handling the electric hedge trimmer safely
Whenever the machine is to be handled or transpor-
ted you must:
– turn off the motor, wait for the cutting device to stop
and unplug the machine from the mains;
– only hold the machine using the handgrips and
position the cutting device in the opposite direction
to that used during operation.
When using a vehicle to transport the machine, pos-
ition it so that it can cause no danger to persons and
fasten it firmly.
• Recommendations for first-time users
Before tackling a job for the first time, it is advisable
to gain the necessary familiarity with the machine and
the most suitable techniques, finding out how to firmly
grip the machine and perform the movements required
by this particular job.
19
EN