Media MH90A3200B-ES Manual De Instrucciones página 6

 Mark a point (3) on the horizontal line C, 112.5 mm to the right of the vertical
reference line.
 Repeat this operation on the other side, checking that the two marks are on the same horizontal
line.
Fix the brackets (Optional):
 Drill at the marked points (1) (2) (3), using a ɸ10 mm drill bit.
 Insert the Wall Plugs 11 into the holes (1) (2) (3).
 Fix the hood fixing bracket 20 with 3 screws 10 (5 x 50) supplied with the hood.
 Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) supplied with the hood.
Hook the hood body:
 Open the panel.
 Remove the Metal grease filter using the handles provided.
 Hook the hood body to the bracket 20.
 Level the hood body itself.
 From the inside of the hood body, fix the screws 10 to Wall Plugs 11 at the points (3).
 Fit the filter into the hood.
 Close the panel.
Right Wrong
6