Hitachi Director's Serie Guia De Funcionamiento página 13

SAFETY PRECAUTIONS (continued)
Floor Stand Setup
1
Remove the Stand Base from the Monitor
Keep the screws. They will
CAUTION be used for the Floor stand
installation.
Install the Monitor on the Floor Stand
2
For Stand Assembly; please refer to the Installation Manual of the Floor Stand.
3
Attach the Monitor to the Floor Stand with the 4 screws used with the
tabletop stand.
Adjust Monitor position left or
CAUTION
right to match with screw holes.
If the screw holes do not align,
the Monitor may be damaged.
Please make sure screws
WARNING
are tightened properly.
LCD Monitors are for use with Hitachi AS-LSZ0081 or AS-LSZ0082 Floor stand for UT37" and
CAUTION
AS-LSZ4281 for UT42" Use with other floor stands could cause instability and possible injury.
All manuals and user guides at all-guides.com
Remove the 4 screws and raise straight up from tabletop stand.
Monitor
Screws from the
tabletop stand.
About the Installation
This product is heavy and should be carried
by at least 2 people.
12