Publicidad
Idiomas disponibles
Idiomas disponibles
PLUG INTO THE APPROPRIATE AC OUTLET, YOU WILL HEAR A BEEPING SOUND, INDICATING
THE HEATER IS ON STANDBY MODE: THE LED SCREEN DISPLAYS ROOM TEMPERATURE. THE
HEATER IS READY FOR USE NOW.
POWER ON/OFF
Press the power button on the heater/ remote control to turn ON the heater.
Press the power button again to turn OFF the heater with 30-sec delay.
MODE
Press the mode button to turn on heating, and to switch between low, high and air supply.
In the working state of the set temperature, press this button to switch to air supply.
TEMPERATURE
Press the temperature button, and then press the '+'/'-' button to adjust temperature from
59 to 95 ℉ (15-35℃) in 5 ℉ increment; or press the temperature button continuously.
TIMER
Press the timer button, and then press the '+'/'-' button to set a timer; or press the timer
button continuously.
OSCILLATION
Press the oscillation button to start and stop the oscillation function. A light will indicate
oscillation state is ON.
4
Publicidad
