BEFORE FIRST USE
1.
Unpack the appliance and all parts. Remove all packaging
materials, including any stickers or labels.
2.
Before the first use, please check if all the parts of the
appliance are in good condition. If not, please contact the
seller or manufacturer.
3.
Clean the interior surface of the coffee maker with a damp
cloth. Wipe dry with a soft cloth immediately. Do not use
abrasive materials. Wipe down the exterior with a soft dry
cloth.
4.
NEVER IMMERSE APPLIANCE OR CORD IN WATER OR ANY
OTHER LIQUID.
5.
Position the coffee maker on a stable, dry, level,
heat-resistant surface near an electrical outlet.
6.
Unroll the electrical cord.
7.
Operate the coffee maker on a separate outlet and circuit
from other appliances to avoid overloading the circuit.
8.
It is recommended to run the coffee maker for one cycle
with just plain water and no coffee to clean the internal
parts of the coffee maker.]
HOW TO USE
1.
Make sure all parts are dry and that the unit is not plugged
into an electrical outlet while filling with water and coffee
grounds.
2.
Open the lid (2) and take out the filter basket (14). Put
your desired amount of ground coffee into the filter and
distribute it evenly.
3.
Reinstall the filter basket (14) and swing the water dis-
penser (3) clockwise so it's above the filter basket (14).
4.
Pour in your desired amount of cold water into the water
tank (4).
5.
Put the carafe (10) with the lid closed onto the warming
plate (8); the lid of the carafe pushes the drip stop valve
(13) and opens the drip hole.
6.
Plug the coffee maker into an electric outlet and switch to
ON (6).
7.
After a few minutes hot coffee drips into the carafe
through the drip hole.
PAUSE 'N SERVE FEATURE:
During the middle of brewing process, you can pause the cycle
by simply removing the carafe out of the coffee maker to sneak
a cup of coffee. The drip stop valve will pause the brewing
cycle and keep coffee from dripping into the carafe.
6
Questions? We're here to help!
Visit: shopelitegourmet.com for support on this product.
NOTE:
-
Never leave the
empty carafe on the
warming plate when
coffee maker is on.
Otherwise the carafe
is liable to crack.
To stop brewing, turn
-
the switch off at any
time.
-
Do not touch the
warming plate as it
is hot!
-
Do not touch the lid
during brewing.
-
After brewing cycle is
complete, wait a
minimum of 10
minutes before taking
out the filter basket to
avoid any injury from
hot steam.
-
Make sure the filter is
secured back in place
before beginning to
operate your
coffeemaker.