Publicidad
Idiomas disponibles
Idiomas disponibles
C L EA N I N G A N D C AR E
This product contains no user serviceable parts. Refer to
service qualified service personnel.
CLEANING OUTSIDE SURFACES
1.
Make sure the iron is unplugged and has
completely cooled.
2.
Wipe the soleplate and outer surface with soft,
damp cloth. Water and small amounts of gentle
household soaps, such as dishwashing liquid, can
be used. Never use heavy-duty cleaners, vinegar
or abrasive scouring pads that may scratch or
discolor the iron.
3.
After the iron has been thoroughly dried, turn the
iron back on and lightly steam over an old cloth.
This will help remove any reside left in the vents.
4.
When finished cleaning, turn iron off and allow
time to cool before storing.
AUTO CLEAN™ SYSTEM
For optimal results over time, it is recommended that you
clean your iron about once a month to keep the steam
vents free of build up.
1.
Fill the water tank well below the MAX fill line.
Plug in the iron.
2.
Select the cotton/linen setting on the
Temperature dial and stand the iron on its heel
while it preheats.
3.
Once the iron has reached the desired
D3300_D3300C_IB-hz_ESF_29209_revB_extrapages.indd 7
D3300_D3300C_IB-hz_ESF_29209_revB_extrapages.indd 7
temperature; turn it off and then unplug it from
the outlet.
4.
Hold iron over a sink with the soleplate facing down.
5.
Press and hold the
AUTO CLEAN™
button
. Be
careful, as hot
water and steam
will come out of the
vents.
6.
Continue to press
the button until
all of the water has emptied. If necessary, move
the iron side-to-side and front-to-back to aid the
process.
7.
When finished, release the AUTO CLEAN™ button
and place the iron on its heel rest.
8.
Plug the iron back in and allow it to heat for about
2 minutes to dry out any remaining water.
STORING YOUR IRON
1.
Once the iron is turned off and unplugged from the
outlet, allow it
to cool.
2.
Check that the variable steam dial is set to dry.
3.
Wrap the cord loosely around the iron.
4.
Store vertically on its heel to prevent water
leaking from the soleplate.
7
6/6/22 2:59 PM
6/6/22 2:59 PM
Publicidad
