Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL PLACEMENT
Items Needed:
BB - 1/4-20 x 3/4in Button Head Screw (Qty: 1)
DD - 1/4-20 Flange Nut (Qty: 1)
H - Mounting Bracket (Qty: 1)
MM - #14 x 3 Hex Head Screw (Qty: 1)
Process:
Note: Mounting bracket may be mounted on either side
of the cabinet. Mounting shown on left side.
• Remove the screw BB and nut DD from the side of the
unit the mounting bracket will be placed.
• Place (H) mounting bracket in desired mounting location.
• Loosely attach (H) with the screw (BB) and nut (DD)
removed earlier. Mark center of mounting hole location,
using holes in bracket as a template.
• Remove bracket. Drill 1/4" mounting hole in stud.
• Attach bracket to unit using (1) BB and (1) DD.
• Finger tighten.
MM
H
Figure 13
• Align cabinet with a stud. Adjust Leveler feet (LL) if
needed.
• After unit is level and in its final position, secure bracket
to wall using (1) MM.
• Wrench tighten all fasteners.
MM
Figure 13.1
Note: Adjustment of leveling feet can influence door align-
ment.
DD
BB
SHELF ADJUSTMENT
• Empty shelf.
• Remove fasteners.
• Rotate shelf upward and pull forward, as shown.
• Move shelf to desired location.
• Insert back of shelf in notches, rotate shelf into place
and reinstall fasteners.
LEVELING FOOT ADJUSTMENT
• Adjust Screw Leveler (LL) to desired position with
Flathead Screwdriver or 7/16in open end wrench as
shown.
LOCKING AND UNLOCKING THE UNIT
Locking the Unit:
• Make sure doors are fully closed.
• Insert the key and turn fully to the left.
• Remove key.
Unlocking the Unit:
• Insert the key and turn fully to the right.
• Remove key.
8
OPERATION
Publicidad
