Publicidad
Step 5
st
1
- With your pencil, strike a mark through the center of the hole in the SAFETY STRAP just below the top surface of
å
your unit so the SAFETY STRAP will not be visible.
2
nd
- Drill a 3/8" hole on the mark.
å
rd
3
- While you squeeze the wings together, gently tap the WALL ANCHOR from the FURNITURE TIPPING
å
RESTRAINT KIT (96) into the hole until it is even with the surface of the wall.
4
th
- Turn the LONG SCREW through the hole in the SAFETY STRAP and into the WALL ANCHOR.
å
NOTE: You will need to turn the LONG SCREW multiple turns to completely tighten and secure your unit to the wall.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story at sauder.com or
Squeeze the wings
together and tap the
wall anchor into the
3/8" hole in the wall.
96
Page 8
Mark and drill
a 3/8" hole
into the wall.
3
rd
th
4
st
1
www.sauder.com/service
Electric drill with 3/8" bit
nd
2
A
430616 / 211-4715
Publicidad
