MD SPORTS 18402 Instrucciones De Armado página 11

FIG.6 UFO SCORER ASSEMBLY
18. Tie the guide wire in the Scorer Arm(#34) to the scorer wire, which leads you pass through the Scorer Arm (#34)
and then attach it to the Scorer Unit (#33) using four Bolts (#30) at the side of the Scorer Arm and four Screws
(#31) at the bottom of the Arm. See FIG.6
19. Attach the Scorer Arm (#35) to the other side of Scorer Unit (#33) using four Bolts (#30) at the side of the Scorer
Arm and four Screws (#31) at the bottom of the Arm. See FIG.6
20. Place the eight Screw Caps (#32) to cover the openings of the Screws (#30) on the Scorer Arms (#34). See FIG.6
FIG.6
35
FIG.7 UFO SCORER-TO-TABLE ASSEMBLY
21. Insert the Scorer Wire from the Scorer through the opening on the side top rail of the table.
22. Attach the scorer (previously assembled) to the side top rails of the table using four Screws (#29). See FIG.7.
23. Attach the Control Box (#22) to the End Apron - B (#10) using two Screws (#16).See FIG.7A.
FIG.7
32
30
33
31
29
Scorer Wire
Velcro Strap
10
Scorer Wire
Guide wire
10
34
Scorer wire
FIG.7A
22
16