Resumen de contenidos para Sauder Boulevard Cafe Serie
Página 1
CONTACT US FIRST CONTACT US FIRST sauder.com sauder.com sauder.com BEFORE MAKING ANY RETURNS TO THE STORE. BEFORE MAKING ANY RETURNS TO THE RETAILER. sauder.com/service Visit to order replacement parts, view video assembly tips, or chat with a live rep. 1-800-445-1527 Prefer the phone? Give us a ring at Customer Service is available Monday-Friday - 9 a.m.
Página 2
• Check the size and weight of your TV. Compare it to the diagram below – before you begin assembly! • This Sauder unit is designed for use with flat panel televisions weighing less than 50 pounds. Never use with a TV that weighs more.
Página 3
TOP (1) ADJUSTABLE SHELF (2) REAR LEG (1) SHELF (1) UPRIGHT (1) BRACE (2) BOTTOM (1) BACK (1) FRONT LEG (1) LEFT END (1) RIGHT DOOR (1) SMALL UPRIGHT (1) RIGHT END (1) LEFT DOOR (1) 427350 www.sauder.com/service Page 3...
Página 4
1- 3/4" HEX HEAD SCREW - 4 1 - 3/4" FLAT HEAD SCREW - 4 5/8" PAN HEAD SCREW - 8 1/2" HEX HEAD SCREW - 4 BLACK 9/16" FLAT HEAD SCREW - 4 SILVER 9/16" FLAT HEAD SCREW - 24 Page 4 www.sauder.com/service 427350...
Página 5
The arrow in the HIDDEN CAM must point Arrow toward the hole in the edge of the board. Hidden Cam Hidden Cam Hole Insert the CAM SCREW or CAM DOWEL into the HIDDEN CAM. Tighten the HIDDEN CAM. 427350 www.sauder.com/service Page 5...
Página 6
Step 1 Look for this icon. It means a video assembly tip is available at www.sauder.com/service/tips Find the numbered video or scan the QR code. å Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
Página 7
D E N H I D The large hole must be here. S u r f a c H I D D E N i t h o 1-3/4" FLAT HEAD SCREW (2 used in this step) 427350 www.sauder.com/service Page 7...
Página 8
Step 3 å Turn four CAM SCREWS (2) into the SHELF (B). å Push four HIDDEN CAMS (1) into the SHELF (B). Arrow Arrow Page 8 www.sauder.com/service 427350...
Página 9
NOTE: Be sure the WOOD DOWELS in the SHELF insert into the UPRIGHT. å Push two GROMMETS (11) into the large holes in the BACK (H). Finished edge Finished edge S u r f a c H I D D E N i t h 427350 www.sauder.com/service Page 9...
Página 10
SHELF (B). Tighten two HIDDEN CAMS. å NOTE: Be sure the WOOD DOWEL in the SMALL UPRIGHT inserts into the SHELF. Arrow Finished edge i t h f a c S u r D E N H I D Page 10 www.sauder.com/service 427350...
Página 11
Step 6 å Push four HIDDEN CAMS (1) into the ENDS (D and E). å Turn eight CAM SCREWS (2) into ENDS (D and E). Arrow 427350 www.sauder.com/service Page 11...
Página 12
WOOD DOWELS (4) into the ENDS (D and E). å Fasten the ENDS (D and E) to the SHELF (B) and BACK (H). Tighten eight HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the ENDS inserts into the SHELF and BACK. Page 12 www.sauder.com/service 427350...
Página 13
å Fasten the TOP (A) to the ENDS (D and E) and SMALL UPRIGHT (O). Tighten six HIDDEN CAMS. å NOTE: Be sure the WOOD DOWELS in the TOP inserts into the ENDS and SMALL UPRIGHT. 427350 www.sauder.com/service Page 13...
Página 14
Tighten four 1/2" HEX HEAD SCREWS (16) using the L-WRENCH (8). å NOTE: You should start each SCREW a few turns before completely tightening any of them. 1/2" HEX HEAD SCREW (4 used in this step) Page 14 www.sauder.com/service 427350...
Página 15
Step 10 å Fasten the BOTTOM (C) to the LEGS (L, M, and N). Use eight 5/8" PAN HEAD SCREWS (15). 5/8" PAN HEAD SCREW (8 used in this step) 427350 www.sauder.com/service Page 15...
Página 16
1-3/4" FLAT HEAD SCREWS (14). å NOTE: Be sure the WOOD DOWELS in the UPRIGHT insert into the BOTTOM 1-3/4" FLAT HEAD SCREW (2 used in this step) 1-3/4" HEX HEAD SCREW (4 used in this step) Page 16 www.sauder.com/service 427350...
Página 17
Step 12 å Fasten four HINGES (10) to the DOORS (J and K). Use eight SILVER 9/16" FLAT HEAD SCREWS (18). SILVER 9/16" FLAT HEAD SCREW (8 used in this step) 427350 www.sauder.com/service Page 17...
Página 18
Fasten the LEFT DOOR (K) to the LEFT END (D) . Use eight SILVER 9/16" FLAT HEAD SCREWS (18). SILVER 9/16" FLAT HEAD SCREW (16 used in this step) BLACK 9/16" FLAT HEAD SCREW (4 used in this step) Page 18 www.sauder.com/service 427350...
Página 19
Tighten the mounting screw after making adjustments å Insert the SHELF PINS (5) into the hole locations of your choice in the ENDS (D and E) and UPRIGHT (G). Set the ADJUSTABLE SHELVES (F) onto the SHELF PINS. (8 used) Notch 427350 www.sauder.com/service Page 19...
Página 20
NOTE: Please read the back pages of the instruction booklet for important safety information. å This completes assembly. Clean with a damp cloth. Wipe dry. And to celebrate, why not share your success story at sauder.com or 22,68 22,68 (3 used) Page 20 www.sauder.com/service...
Página 21
REFERENCE DESCRIPTION QUANTITÉ REFERENCE DESCRIPTION QUANTITÉ conserver le livret pour future référence. Pour contacter Sauder en DESSUS ................1 EXCENTRIQUE ESCAMOTABLE ....18 ce qui concerne cet TABLETTE ................1 VIS D'EXCENTRIQUE ..........18 élément, faire référence DESSOUS ................1 GRANDE CHEVILLE EN BOIS ......14 au numéro de lot et...
Página 22
! Insérer deux GRANDES CHEVILLES EN BOIS (3) dans • Cette unité Sauder est conçue pour les téléviseurs à écrans plats pesant moins de 22,6 kg. Ne jamais utiliser avec des téléviseurs la TABLETTE (B).
Página 23
Fixer la PORTE DROITE (J) à l'EXTRÉMITÉ DROITE (E). Utiliser huit VIS TÊTE PLATE 14 mm ARGENTÉE (18). Fixer la PORTE GAUCHE (K) à l'EXTRÉMITÉ GAUCHE (D). Utiliser huit VIS TÊTE PLATE 14 mm ARGENTÉE (18). 427350 www.sauder.com/service Page 23...
Página 24
Ceci complète l'assemblage. Nettoyer avec un tissu humide. montage après avoir ajusté Essuyer. Insérer les GOUPILLES DE TABLETTE (5) dans les trous choisis dans les EXTRÉMITÉS (D et E) et le MONTANT (G). Poser les TABLETTES RÉGLABLES (F) sur les GOUPILLES DE TABLETTE. Page 24 www.sauder.com/service 427350...
Página 25
EXCÉNTRICO ESCONDIDO ......18 su referencia futura. Si necesita ponerse en ESTANTE ................1 BIELA DE EXCÉNTRICO ........18 contacto con Sauder en FONDO .................1 PASADOR DE MADERA GRANDE ....14 cuanto a esta unidad, EXTREMO IZQUIERDO ..........1 PASADOR DE MADERA PEQUEÑO .....4 refiérase al número...
Página 26
Atornille cuatro BIELAS DE EXCÉNTRICO (2) en el ESTANTE (B). abajo - antes de comenzar el ensamblaje! Empuje cuatro EXCÉNTRICOS ESCONDIDOS (1) dentro • Esta unidad Sauder está diseñada para ser usada con del ESTANTE (B). televisores de panel plano cuyo peso sea inferior a 22,6 Kg. Nunca la use para un televisor de mayor peso.
Página 27
Fije la PUERTA DERECHA (J) al EXTREMO DERECHO (E). Utilice apretar cualquier tornillo firmemente. ocho TORNILLOS PLATEADO DE CABEZA PERDIDA de 14 mm (18). Fije la PUERTA IZQUIERDA (K) al EXTREMO IZQUIERDO (D). Utilice ocho TORNILLOS PLATEADO DE CABEZA PERDIDA de 14 mm (18). 427350 www.sauder.com/service Page 27...
Página 28
Apriete el tornillo de montaje después de hacer los ajustes Inserte las ESPIGAS DE ESTANTE (5) en los agujeros al nivel preferido de los EXTREMOS (D y E) y del PARAL (G). Coloque los ESTANTES AJUSTABLES (F) sobre las ESPIGAS DEL ESTANTE. Page 28 www.sauder.com/service 427350...
Página 29
TOUJOURS décharger les tablettes et les tiroirs, en commençant par les surface supérieures, avant de déplacer le meuble. NE JAMAIS pousser ou tirer un meuble sur de la moquette. Demander à une autre personne de le soulever correctement pour le déplacer et/ou le repositionner. 427350 www.sauder.com/service Page 29...
Página 30
SIEMPRE descargue los estantes y cajones, empezando con las superficies superiores, antes de moverlo. NUNCA empuje ni tire de los muebles sobre una alfombra. Obtenga que un amigo le ayude a levantarlo correctamente para moverlo y/o reposicionarlo. Page 30 www.sauder.com/service 427350...
Página 31
à compter de la date d'achat la première fois et qui sont signalés à Sauder dans les limites de couverture de la contre tout défaut de matériaux ou de fabrication des composantes de mobilier Sauder.
Página 32
BEFORE MAKING ANY RETURNS TO THE RETAILER. So, how did it go? Dear Valued Customer: Thanks so much for choosing Sauder® furniture. I hope the Set a world record for speed? purchase and assembly process was a positive experience Feeling good about yourself? and you feel good about the furniture you just built.