Publicidad
Idiomas disponibles
Idiomas disponibles
Please read and understand this manual carefully before using the automatic welding
mask.
•
This auto-darkening helmet is not suitable for "overhead" welding, laser
welding/cutting, or oxyacetylene welding/cutting applications.
•
This helmet will not protect against explosive devices or corrosive liquids.
Machine guards or eye splash protection must be used when these hazards
are present.
•
Impact resistant, primary eye protection, spectacles or goggles that meet
current ANSI specifications must be worn at all times when using this
welding helmet.
•
Avoid work positions that could expose unprotected areas of the body to
spark, spatter, direct and/or reflected radiation. Use adequate protection if
exposure cannot be avoided.
•
Do not make any modifications to either the ADF cartridge or helmet other
than those specified in this manual.
•
Do not use any replacement parts other than those specified in this manual.
Unauthorized modifications and replacement parts will void the warranty and
expose the user to the risk of personal injury.
•
Do not immerse this helmet in water because this model is not waterproof.
•
Do not use any solvents on any ADF or helmet components.
•
The recommended operating temperature range for this ADF cartridge is
-10°C–65°C (14°F–149°F). Do not use this device beyond these temperature
limits.
•
Failure to follow these warnings and/or failure to follow all of the operating
instructions could result in severe personal injury.
2
WARNING!
Publicidad
