Care and Cleaning
Draining the Reservoirs
IMPORTANT: UNPLUG THE DISPENSER BEFORE PERFORMING THIS PROCEDURE.
1. Dispense hot water from the water dispense point until the temperature drops to a safe level to avoid the risk of
scalding.
Slide and hold hot safety to the left.
2. Remove the water bottle
3. Press all dispense buttons until water no longer comes out.
IMPORTANT: Collect the water in a container, not the drip tray.
4. Follow the procedures in step 3 of the "Cleaning the Waterways" section on page 8 for draining the hot and cold
water tanks.
NOTE: To conserve energy when not using the dispenser for a long period of time, unplug the dispenser and drain
the reservoirs.
49-6000233 Rev. 1
Push dispense button down.
11