Mi XMMNT27HQ Manual De Usuario página 8

Instructions
Connections
1. Connecting the DisplayPort cable (only when using DisplayPort).
a. Make sure the monitor and the computer are both turned off.
b. Connect one end of the DisplayPort cable to the computer's DisplayPort output port, and the other end
to one of the monitor's DisplayPort input ports.
2. Connecting the HDMI cable (sold separately) (only when using HDMI).
a. Make sure the monitor and the computer are both turned off.
b. Connect one end of the HDMI cable to the computer's HDMI output port, and the other end to one of the
monitor's HDMI input ports.
3. Connecting the USB cable.
a. Make sure the monitor and the computer are both turned off.
b. Connect the USB cable to the USB IN port of the monitor and the USB port of the computer.
4. Connect a headset or any 3.5 mm compatible external audio device to the monitor's audio output port.
5. Plug both the power cords of the computer and the monitor into a power outlet.
CAUTION: If the power cord or DisplayPort cable is damaged, it must be replaced with a genuine power cord
AC Power Cord
CAUTION: The audio output port is only used for the output of audio signals.
DisplayPort (1.4): 2560 × 1440, max. refresh rate 165 Hz.
HDMI (2.0): 2560 × 1440, max. refresh rate 144 Hz.
6
5V-2A
5V-2A
USB Cable
DisplayPort Cable
HDMI Cable
(sold separately)