Naterial ORIS 2023R09P01-0316 Manual De Instrucciones página 43

Idiomas disponibles

cleaning

are

You can clean your aluminium furniture with a non-abrasive sponge. use clear water with

a little soap. In order to avoid the appearance of traces during the drying, we advise you to

proceed to the drying with a terry towel, right after the cleaning.

Wood is a living material that is very aesthetic, warm and efficient but it requires maintenance.

It is recommended to maintain your wooden garden furniture twice a year. A first time in spring

and then at the end of the summer. The cleaning is done with a brush and warm soapy water.

But not with just any soap. The use of black soap or Marseille soap is preferred. rinse thoroughly

with lukewarm water. In any case, do not use a high pressure cleaner. If you want the wood

to keep its original colour over time, use a "colourless saturator" that nourishes the wood and

protects its natural appearance for a long time. Apply the saturator twice a year on wood that

has been cleaned beforehand with a dry cloth and apply it in the direction of the wood fibres. If

after cleaning, stains remain, you can then sand the surface with fine grain sandpaper. This is

the advantage of solid wood. If you have neglected the maintenance of your wooden furniture

until now, it is not too late to make up for the damage. Whatever your case, test your solution on

an inconspicuous area to make sure the result is what you want.

Wintering

In case of prolonged non-use or bad weather, it is recommended to store your product in a dry

place or to use a suitable cover to protect your it.

5. FAStEnInGS

For better stability and for your safety, tighten the screws once again around two

weeks after setup. Tighten the screws also at least once a year for a long-lasting

nings

maintenance.

6. REPAIR

Let's not throw away! Let's repair! repairing a product is a quick and easy way to significantly

increase its lifespan and avoid throwing it away. At naterial, we actively work to facilitate the

repair of our products and offer the right spare parts for each product we sell. The service

department at your point of sale has a list of spare parts available for that product. In case of a

defective or broken part, we invite you to contact the after-sales service of your point of sale.

7. LEt'S PRotEct ouR EnVIRonMEnt

In order to protect the environment, cardboard packaging and products at the end of their life

cycle must be dropped off at a waste collection organization for sorting, processing and a new

life.