Descargar Imprimir esta página

Naterial LITA TEAK 2023R09P01-0730 Manual De Instrucciones página 44

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 10
EN
Wood is a living material that is very aesthetic, warm and e cient but it requires maintenance. it is recommended to maintain your
wooden garden furniture twice a year. A first time in spring and then at the end of the summer. The cleaning is done with a brush and
warm soapy water. But not with just any soap. The use of black soap or Marseille soap is preferred. Rinse thoroughly with lukewarm
water. In any case, do not use a high pressure cleaner. If you want the wood to keep its original colour wood and protects its natural
appearance for a long time. Apply the saturator twice a year on over time, use a "colourless saturator" that nourishes the wood that has been cleaned
beforehand with a dry cloth and apply it in the direction of the wood fibres. If after cleaning, stains remain, you can then sand the surface with fine grain
sandpaper. This is the advantage of solid wood. If you have neglected the maintenance of your wooden furniture until now, it is not too late to make up for
the damage. Whatever your case, test your solution on an inconspicuous area to make sure the result is what you want.
Machine wash cushion covers if they are separable from the cushions. Most of the cushions ordered on NATERIAL products are removable covers. If not, a
wet sponge and upholstery shampoo will help remove stubborn stains.
For fabrics on sun sheltering products, a wet sponge and upholstery shampoo will help remove stubborn stains. Strictly follow the cleaning
recommendations on the labels of textile products.
Wintering
In case of prolonged non-use or bad weather, it is recommended to store your product in a dry place or to use a suitable cover to protect your it.
The cushions and fabric parts of NATERIAL products should be removed when not in use for long periods of time. Brush the cushions regularly to remove
dust. Be sure to store them in a dry, ventilated area to prevent the development of mould or odours.
5. FASTENINGS
For better stability and for your safety, tighten the screws once again around two weeks after setup. Tighten the screws also at least
once a year for a long-lasting maintenance.
6. REPAIR
Let's not throw away! Let's repair! Repairing a product is a quick and easy way to significantly increase its lifespan and avoid throwing it away. At Naterial,
we actively work to facilitate the repair of our products and o'er the right spare parts for each product we sell. The service department at your point
of sale has a list of spare parts available for that product. In case of a defective or broken part, we invite you to contact the after-sales service of your
point of sale.

Publicidad

loading