Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. INTRODUCTION.
We appreciate the trust placed in our brand and we hope that the welding equipment you have just
acquired will be of great use to you. Your machine has many features that will make your job faster and
easier. Safety, comfort and reliability were a priority for the design of this tool, which makes maintenance
and operation easy.
This machine is a direct current (DC) inverter generator suitable for performing electric arc welding. Thanks
to the inverter technology, which allows high performance to be obtained while maintaining reduced
dimensions and weight, the machine is portable and easy to handle, suitable
for welding with coated electrodes. It can be connected to an AC generator.
With the volume of the IGBT equal to that of a monotube and the power of the IGBT several times greater
than that of a MOS tube, the IGBT uses one monotube instead of several MOS tubes, following the
principle of operation:
2. DESCRIPTION OF THE PRODUCT.
3. GENERAL SAFETY RULES.
WARNING: These instructions have been developed to facilitate the proper installation, operation
and maintenance of the equipment. Read the entire manual carefully before using the equipment, in order
to understand its features and reduce risks during its operation. Make sure you read and understand all
instructions, and to pay attention to all warnings and precautions throughout this manual. Failure to follow
the instructions contained in this manual may result in electric shock, fire and/or serious personal injury.
WORK AREA.
• Keep your work area clean and well lit. Messy tables and dark areas may cause accidents.
• Do not use the machine in explosive atmospheres, such as in the presence of flammable liquids, gases
or dust. The electric tool generates sparks that may cause fires.
• Make sure observers, children and visitors are away from the machine while you are working with it.
Distractions can make you lose control.
A.
Welding current selector.
B.
Thermal protection indicator LED.
C.
Negative (-) welding terminal.
D.
Positive (+) welding terminal.
E.
ON/OFF switch.
F.
Power cord.
G.
Power LED.
H.
Screen.
KEEP THESE INSTRUCTIONS.
23
Publicidad
