Hyundai HHA221801 Manual Del Usuario

Professional home electronics
HHA221801
INTRODUCTION
The wireless doorbell has a range up to 150 meters. The doorbell is suitable
for home, offices, hotels and commercial buildings. There are 32 different
melodies and the volume can be adjusted in 4 levels. The doorbell
transmitter is waterproof and can easily be installed outside.
INSTALLING THE TRANSMITTER
Install the transmitter on the location of preference. The transmitter can be
installed inside or outside. You can decide to use the adhesive tape or the
screws to install the transmitter.
Use a small flat screw driver to open the transmitter.
When screwing the transmitter to the wall, you need to
screw through the base plate of the transmitter.
CHANGING THE BATTERY OF THE TRANSMITTER
Open the transmitter to (re)place the battery.
The transmitter works on 12V 23A battery.
INSTALLING THE RECEIVER
The receiver needs to be placed in a socket. The receiver needs to be in a
range of 150 meters away from the transmitter.
FUNCTIONS RECEIVER
1) Volume control
2) Music selection
3) Pairing with transmitter
RECEIVER - VOLUME CONTROL
The receiver's volume can be adjusted by pushing the button on the receiver.
Total there are 4 different settings for the volume.
RECEIVER - MUSIC SELECTION
The music for the receiver can be adjusted by pushing the button on the
receiver. Everytime the receiver will play the song/sound. Total there are 32
different settings for the sounds.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS IT CONTAINS
IMPORTANT INFORMATION.
FOR QUESTIONS OR SUPPORT PLEASE CONTACT US AT:
NL / EN - support@alleenonline.nl
BE / FR - support@alleenonline.be
Name Card
Push button
Transmitter
HOW TO USE THE DOORBELL
Push the button on the transmitter. The receiver receives the signal and will
play the presetted sound.
RECEIVER - PAIRING WITH TRANSMITTER
The receiver and transmitter are already paired. If there is any disconnection
or short range, the receiver and transmitter needs to be re-paired. Please
follow the following steps.
1) Hold the receiver's pairing button for 3 seconds untill you here hear the
"Ding-Dong" sound.
2) Press the transmitters push button to pair the transmitter and receiver.
3) The receiver will play the "Ding-Dong" sound to confirm the pairing is
confirmed.
TECHNICAL SPECIFICATIONS:
Material: ABS + PP
Color: Black
Receiver: 1 x Plug-in receiver
Transmitter: 1 x Transmitter (A23 Battery included)
Included: 1 x Adhesive tape, 2 x Screw
Operation area: 150 meters (Open air)
Waterproof level: IP44
Sounds: 32 different sounds
Volume: 4 Level adjustable volume, 10 up to 95 dB
Weight: 117 gram
Hyundai logos are trademarks of Hyundai Corporation, Korea.
Licensed to The Investment Company Europe B.V. All rights reserved.
Distributed by The Investment Company Europe B.V. Exclusively developed for sales
The artwork and design of this package are protected by European copyright law and
may not be reproduced, distributed, displayed, published or used for any purpose
without prior written permission. It is not permitted to alter, or reproduce any
USER MANUAL
Wireless plug-in doorbell
Dual Voltage 220V/60Hz
Volume button
Music Selection / Pairing Button
Receiver
© 2019 The Investment Company Europe B.V.
in Belgium, the Netherlands and Luxembourg.
PATENT PENDING
trademarks or copyright notice from this package.
Licensed by Hyundai Corporation, Korea