Publicidad
METHOD OF OPERATION
1. After the power is plugged in, press the power
switch, the indicator light is on.
2. Press and hold the power button for 3 seconds to
power on and standby.
3.Turn on the power, the temperature defaults to
℉
122
and the time defaults to 30 minutes.
4.Timing adjustment: Click the timer "－" "+"
button to select a time of 10-90 minutes（(Time
adjustment for mittens and knee pads: 30-60-90
minutes)）.
5.Temperature adjustment: Click temperature "－"
86-158℉
"+" select temperature
(According to
personal preference, it is recommended to adjust the
temperature from low to high to avoid high
temperature.).
6.The controller is dedicated to one-to-one products
and cannot be connected to mismatched heating
pads.
15
Publicidad
