Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing the Camera
■ Please format the memory card if it is used for the first time or if it
has been used with other cameras before.
■ Suggest to use at least class 10 or above high.
■ Be sure the power switch is OFF before inserting or removing SD
cards or batteries.
■ A Micro SD/TF memory card must be inserted into the memory card
slot in order to save photos and videos.
■ After using the memory card many times, its performance will be
reduced. If the memory card performance decreases, you need to buy a
new memory card.
■ Don't remove the card, don't turn off the power while formatting or
reading or saving because data could be damaged.
■ If the capacity of the memory card is full, the camera will stop
recording automatically and the LEDs will be off. Turn on the Endless
Capture function if you want to keep on saving data: in this case the
newest data will replace the oldest.
■ Do not insert the memory card forcibly. Please refer to the marking
on the camera. Press the edge of the card gently to pop up the TF card.
2.4. External power supply
Optionally, you can connect an external
6V DC power source with at least 1.5 A
to the 'DC In' jack at the bottom of the
camera. The power
connector is a 3.5x1.35 mm coaxial DC
11
Publicidad
