Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
EN
Wire rope cutter ES1i, ES2i, ES3i
Use
• Insert the wire rope and turn the handle 1 until the edge
of the blade 2 rests on the wire rope. Do not cut angularly!
• Squeeze the handles 1 to cut the wire rope.
Maintenance
• Oil movable parts.
General safety instructions
Please read the instruction manual before using the tool and use the
tool only for the specifi ed application. Please observe the instructions
during the use and keep the safety instructions next to the tool.
BAUDAT assumes no liability for damages or injuries caused by
unsafe use of the tool, defective maintenance or faulty application.
The tool must only be used by instructed professionals. The tool must
only be repaired from the manufacturer. For works of external staff
we assume no liability. Use only original BAUDAT spare parts! If not,
claims of the warranty declaration expires.
For fl exible wire ropes up to max.
ES1i
Ø 6 mm (≤ 1800 N/mm²),
Ø 8 mm (≤ 750 N/mm²),
Ø 10 mm (≤ 220 N/mm²)
ES2i
Ø 10 mm (≤ 1800 N/mm²),
Ø 11 mm (≤ 750 N/mm²),
Ø 12 mm (≤ 220 N/mm²)
ES3i
Ø 14 mm (≤ 1800 N/mm²),
Ø 16 mm (≤ 750 N/mm²),
Ø 18 mm (≤ 220 N/mm²)
Do not live working!
Switch off current!
No extremities near the blades!
6
Publicidad
