Switching between the normal display and detailed display
Push and hold the [
seconds to switch the display mode.
The normal display mode is selected as a factory default setting.
Normal display mode (factory default)
82
Cool
Mode
Fan Speed
Detailed display mode
Room A
75
Cool
Mode
Icon list
Shows the Energy saving operation is
activated.
Shows the remote control sensor is
activated.
(*2)
Shows the Night operation is activated.
Shows the central control device prohibits
the use of the remote control.
Shows the saving operation is activated.
*2 Normally the temperature sensor of the indoor unit senses the temperature. The temperature around
the remote control can also be sensed. For details, contact the dealer where you purchased the air
conditioner. * Do not use the function when the air conditioner is controlled in a group.
25-EN
OM_1121250216_EN_FR_ES.indb 25
OM_1121250216_EN_FR_ES.indb 25
CANCEL] button and [
(*1)
Energy saving icon
12:00
• Displayed when performing the power saving operation of the air
conditioner.
F
Soft cooling icon
• Shows the air conditioner is performing the soft cooling operation.
Saving icon
• Displayed when performing operation by suppressing excessive
heating or excessive cooling through automatic correction of the
temperature set point.
(*1)
12:00
Icons appear on the screen when the detailed display mode is
selected.
F
*1 • The " Preparing to heat" icon appears when the heating
Fan Speed
operation starts or when defrosting operation.
The indoor fan stops or the operation becomes the blowing
operation when it is displayed.
• It may be displayed depending on the model when
" Preparing to operate" is displayed.
MONITOR] button at the same time for more than 4
Shows a timer function is activated.
Shows the Louver lock is activated.
Shows the setting of the louver.
!
Shows the filter needs to be cleaned.
Shows soft cooling is activated.
Shows operation switching control is in
progress.
- 25 -
Owner's Manual
8/4/2565 BE 13:24
8/4/2565 BE 13:24