Publicidad
Idiomas disponibles
Idiomas disponibles
the erasure prevention tabs .
• If the erasure prevention tabs have been removed and you want to use the tape
to record again, please cover the holes with adhesive tape.
Cassette Playback Operation
1.Slide the Function Selector (7) to Tape position.
2.Open the Cassette Tape Door (10) and place a cassette tape in it correctly,
then close the Cassette Tape Door (10)
3.Press Play Button (4) to play the track of the cassette tape.
4.Rotate the Volume Control (13) to adjust volume level as desired.
5.Press Stop Button (1) to stop the tape playback.
6.Press Fast Forward (9) or Fast Rewind (10) Buttons to a specific section when
it is in the stopped state.
7.Open the Cassette Tape Door (10) and take out the tape in the stopped state
The cassette tape door is operated manually, please make sure to close it
completely.
Automatic stop
During playback, the keys are automatically released at the end of a tape and
the set is switched off, you need to turn the tape over to continue playing.
Note: During fast forwarding/rewinding, the keys will not be released at the end
of a tape, you have to stop it in time manually. Otherwise, it will cause
malfunction.
Recording Operation
Recording from the Radio
1.Slide the Function Selector (7) to Radio position and tune to the desired radio
station .
2.Open the Cassette Tape Door (10) and place a blank cassette tape in it
correctly, then close the Cassette Tape Door (10)
3.Press Record Button (5) to start recording, the play button will also be
automatically pressed .
4.Press Stop Button (1) to stop recording.
5.Open the Cassette Tape Door (10) and take out the tape in the stopped state.
Making your recording
1.Slide the Function Selector (7) to Tape position.
2.Open the Cassette Tape Door (10) and place a blank cassette tape in it
correctly, then close the Cassette Tape Door (10)
3.Press Record Button (5) to start recording, the play button will also be
automatically pressed.
4.Speak towards the built-in Mic(11)
5.Press Stop Button (1) to stop recording.
6.Open the Cassette Tape Door (10) and take out the tape in the stopped state.
Recording will stop automatically when the tape runs out, you need to turn the
cassette over to record on the other side.
If the playback recording makes abnormal noise, it may be caused by the
microphone being too close to the recording source. You need try to keep a
certain distance to record again.
4
Publicidad
