ian QAD-90011 Manual De Usuario página 10

3. Connect the test leads IN SERIES to the device or
circuit being measured's load.
4. Read current value on Digital Display.
5. Additionally, the 10A setting is designed for intermittent
use only. Maximum contact time of the testing leads with
the circuit is 15 seconds, with a minimum wait time of 15
minutes between tests.
RESISTANCE MEASUREMENT
1. Red lead to "VΩmA". Black lead to "COM".
2. Set RANGE switch to desired OHM position.
3. If the resistance being measured is connected to a
circuit, turn off power and discharge all capacitors before
measuring.
4. Connect test leads to the circuit being measured.
5. Read resistance value on Digital Display.
10