PPA CITROX A408003 Manual

WARNING:
Do not use the equipment
without referring to this
manual rst.
MANUAL
TOMADA 10A
SMART
LÍNE
Google Home
P30400 - 04/2022
Rev. 0
The 10A Smart Socket makes it easy to turn your conven onal sockets into smart
sockets. All it takes is a SIMPLE CONFIGURATION to add it to your internet, and
right a er you can turn it on and off, measure energy consump on and create
rou nes for your electronic equipment.
The PPA ON app will help you do all this, and with the help of assistants
and voice (Alexa or Google Home) it becomes easier and more interac ve.
Model A408003
Supply voltage
100 ~ 240 V | 50/60 Hz
Nominal chain 10 a
Max power consumption 3200W
Wi-Fi IEEE 802.11b/g/n 2,4 GHz ,
Wi-Fi Range
30 m without obstacles
PPA ON compatible systems iOS , Android
Operating Temperature
-15 a 40 °C
Product Dimension (WxHxD)
75× 40× 75 mm
Product weight
98 g
Introduc on to the applica on:
Step 1: To download the "PPA ON" applica on, go to the Google Paly Store or
the Apple Store.
NOTE: The applica on is not available for Windows Phone (Microso )
opera ng system and other opera ng systems on the market, except the two
men oned above.
A er installing the applica on, follow the steps:
Step 2: Log in if you already have an account, if you do not register in the App,
entering informa on such as: Country and e-mail, a er entering the data click
on Get verifica on code.
Click Register soon
a er accep ng the
User Agreement and Privacy Policy
terms
We understand the importance of
privacy. In order to fully present our
collection and use of your personal
information, we have thoroughly
reviewed our privacy policy and user
agreement in accordance with the
latest laws and regulations. By clicking
[Agree], it means that you have read,
understood and accepted the entire
updated Privacy Policy and User
Agreement. Please take some time to
Login with an existing account
familiarize yourself with our privacy
Register Not accepted
A er clicking on
obtain the
Register
Enter the
verifica on code it
authen ca on code
will be requested.
Brazil
seu email@seuemail.com Your email@youremail.com
Obtain the verifica on code
Registry verifica on code The verifica on code has been sent to
your email address:
495XXX
brenosouzasilva099@gmail.com Resend (51s)
to verify your registra on account
it is in the email
informed
Set password
a er entering the code the App will
Use 6 to 20 characters, mixing le ers and numbers
ask for register one password.
Concluded
Step 3: Add a device, for this and turn off mobile data connect your
Smartphone to the WiFi network that the device will be connected to. Turn on
Bluetooth, turn on device loca on click '+' in the upper right corner.
Universal
Smart
Control
Smart
IP HD câmera
No device
Light switch
Cancel EZ Mode
Cancel
Restart device first
If the indicator is flashing quickly, skip the reset step.
1 On
2 Press the PROG bu on for 5 seconds
3 Make sure the indicator light is flashing quickly.
Turn on the device.
Turn off a er 10s and turn on again
Back Next
Make sure your device is reset and in EZ Mode (LED flashing quickly / 2 mes
per second). If not, press and hold the reset bu on un l the LED flashes
quickly.
Step 4: Enter the WiFi network and password the device will connect to.
Click next.
Cancel Cancel
Select a 2.4GHz Wi-Fi network Add Device
and enter the password.
Make sure the Wi-Fi signal is stable
If your Wi-Fi is 5GHz, set it to 2.4GHz
before proceeding. Common Router
Configura on Method
Products_2.4GHz
productscx2
Analyze Register the Start the
the devices device on
device
the Cloud
Next
Cancel
Concluded Cloudy
Successfully added
Temp. outdoor Humidity outdoor Pressure
All Devices Living Room
TOMADA 10A
Device successfully added.
TOMADA 10A...
My Page Inteligent Me
Changing the Device Name
TOMADA 10A SMART
To rename the device, tap it, then Edit
Device informa on
, in sequence
Instant Scene and Operator
Third-Party Support and Control
Share device with other users
«Share device» and «Add share number»
or «email»
Device Offline No fica on
Offline No fica on Add Share
2
Others Country/ region Brazil
Device sharing
Account
number
1
Create group
Device update Is the latest version
Remove device
Remove device just click and go
ATTENTION !! IF THE DEVICE REGISTRATION PROCEDURE THROUGH THE
EZ MODE IS NOT SUCCESSFULLY CARRIED OUT, IT WILL BE NECESSARY TO
REGISTER THROUGH THE AP MODE.
Step 5: Enter add device again. Enter the Wi-Fi network and password the
Accepted device will connect.
Click next.
Cancel
Select a 2.4GHz Wi-Fi network
and enter the password.
If your Wi-Fi is 5GHz, set it to 2.4GHz
before proceeding. Common Router
Configura on Method
Password
Next
Make sure your device is reset, to enter AP Mode (LED flashing slowly 1 me
per second), tap EZ Mode in the app to change the mode. If not reset, press
and hold the reset bu on un l the LED flashes slowly.
Cancel EZ Mode Cancel AP Mode
Restart device
Restart device
Press the bo on RESET for 5s.
Turn on the device.
Turn off a er 10s and turn on again
Next
Back Back Next
A er connec ng to the Lamp, the App will ask you to login to the local network
Add Manually
(Smartlife-XXXX) that it will make available, a er connec ng to the local network,
go back to the applica on to con nue the switch registra on.
Smart Alarm Smart Relay
Module
Cancel AP Mode
Restart device
Electrifier PPA Connect
Wi-fi plug Lamp Press the bo on RESET for 5s again
un l the indicator flash slowly
Check if the indicator is flashing slowly.
Back Next
Your device has been successfully added, then tap Done
Modo EZ
Cancel
Restart device first
Concluded
Successfully added
LAMP...
Device added successfully
If the indicator is
flashing quickly,
skip the reset step.
1 On
2 Press the RESET bu on (toggle) for 5
seconds (subject to instruc ons)
3 Make sure the indicator light is flashing
quickly
Next
GENERAL TERMS AND CONDITIONS OF WARRANTY
MOTOPPAR da Amazônia Indústria e Comércio de Eletrônicos
Ltda, registered with CNPJ No. 09.084.119/0002-45, located at
Praça Linear, No. 100, Bloco II, Centro, Santa Rita do Sapucaí/MG,
CEP 37.500-000, manufacturer of the PPA and CITROX products,
guarantees this device against defects in design, manufacture,
Cancel assembly and/or jointly and severally as a result of defects in the
quality of the material that make it inappropriate or unsuitable for the
consumption for which it is intended, for a legal period of 90 (ninety)
Add Device
days from the date of purchase, provided that the installation
Make sure the Wi-Fi signal is stable
guidelines described in the instruction manual are observed.
As a result of the credibility and trust placed in PPA AND CITROX
products, we added another 275 days to the above period, reaching
a total of 1 (one) year, also counted from the date of purchase to be
proven by the consumer through the proof of purchase (Supervisor
Note).
In the event of a defect, within the warranty period, the liability of PPA
and/or CITROX is restricted to the repair or replacement of the
device manufactured by it, under the following conditions:
1. The repair and readjustment of the equipment can only be
Analyze Register the Start the
carried out by the Technical Assistance, which is qualified to
the devices device on
device
the Cloud
open, remove, replace parts or components, as well as repair
the defects covered by the warranty, and, in the absence of this
and any use of parts not originals contained in the use, will
result in the waiver of this term by the consumer;
2. The warranty will not extend to accessories such as cables,
TOMADA 10A SMART
Edit (inf. and conf.
screws kit, fixing brackets, sources, etc.;
general)
3. Expenses for packaging, transport and reinstallation of the
product are exclusively borne by the consumer;
4. The equipment must be sent directly to the company
responsible for the sale, representative of the manufacturer,
through the address on the purchase invoice, properly
packaged, thus avoiding the loss of warranty;
5. The replacement or repair of the equipment does not extend
the warranty period.
This warranty will be void if the product:
1. Suffer damages caused by agents of nature, such as
atmospheric discharges, floods, fires, landslides, etc.;
2. It is installed in an improper electrical network or even in
disagreement with any of the installation instructions set out in
the manual;
3. Defects caused by falls, blows or any other physical accident;
4. For violation of the equipment or attempt to repair by
unauthorized personnel;
5. It is not used for its intended purpose;
6. Not used under normal conditions;
7. Suffer damage caused by accessories or equipment attached
to the product.
Recommendation:
We recommend the installation and maintenance of the product by a
specialized technical service.
If the product has a defect or abnormal operation, look for a
specialized Technical Service for the necessary corrections.
Share device
Add a new family member to be able to share all smart
devices and scenarios. Familiar se ngs
Device shared exclusively with the following users
Email
Motoppar da Amazônia Indústria e Comercio de Eletrônicos LTDA
Cancel
Praça Linear, 100, Bloco 2 - Centro
Select a 2.4GHz Wi-Fi network Santa Rita do Sapucaí - MG - CEP 37540-000 - Brasil
and enter the password.
CNPJ: 09.084.119/0002-45
If your Wi-Fi is 5GHz, set it to 2.4GHz
before proceeding. Common Router
www.ppa.com.br | +55 14 3407 1000
Configura on Method
Next
Cancel AP Mode
Restart device
Confirm that the indicator is flashing slowly.
Then proceed to the next step.
Back Next
Cancel
Conect the telefone Wi-Fi to
Ac ve
hotspot device
1. Telephone conected access point showing below
Atual network
Avalible network
2. Retorn to the app and con nue add devices
Connect now
Made by: