Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 16
9
×1
10
IMPORTANT: THIS UNIT MUST BE SECURED TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT
WARNING
Serious or fatal crushing injuries
can occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest
drawers
* Unless specifically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tipover restarints may only
reduce, but not eliminate the risk of
tipover
OPTION 1: Attachment into a wall stud (preferred method)
Attach bracket (12) to top with screw (9) but not fully tighten. Using a stud finder, locate a stud in the wall. Place your unit
against the wall, with the safety bracket (12) aligned in this location. To make driving the screw easier, you can drill a 1/8"
diameter pilot hole (3mm) through the safety bracket (12) into the stud. Drive the screw (10) through the safety bracket (12)
into the wall stud. Fullly tighten the screw (9).
OPTION 2: Attachment into drywall
Attach bracket (12) to top with screw (9) but not fully tighten. Locate your unit where desired against a wall and mark the
wall through the safety bracket (12), then move your unit aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap
the wall anchor (11) into the hole until it is flush. Move your unit into location and fasten the wall bracket (12) to the wall
anchor (11) with the screw (10).Tighten the screw (9).
ameriwoodhome.com
×1
11
Hole
Option 1
STUD
Option 2
11
WALLBOARD
16.1 Adjust Center leg to
make feet contact with
floor at same level.
×1
×1
12
For Masonry, Concrete, or other wall materials:
Consult your local hardware store for appropriate
9
anchors to securely attach the safety bracket
10
12
LEVELER
23
A
You
Tube
Publicidad
