Maruyama MD7026 Manual Del Usuario página 17

When the box is opened, please check to make sure all the accessories are included. If any are missing or
damaged, please tell the sales agent from which you purchased the machine.
Flexible Swivel
Straight pipe
pipe
pipe
Chemical tank
Air filter
Choke lever
Throttle lever
Starter
Static electricity builds up in the chemical spray depending on the type of chemical, temperature, and
humidity and this could generate a strong static electric charge. To prevent this, use the electricity rejection
tape and ground braided line attached to the machine.
The electricity rejection tape and ground braided line are located in the machine, so pass the ground
braided line to the inside of the hose and discharge tube.
Ground braid line
Attach the Flexible pipe to the operation machine using a band and Swivel pipe to the flexible pipe using a
band.
Connect the Straight pipe to the Swivel pipe and Tornado tip.
2. Names of the Components
Band, large
Band, small
Tornado
tip
×2
Blower
Engine
Band,
large
Fuel tank
Electricity rejection tape
Box spanner
Operator's Manual
Serial number
Warning Label
Swivel pipe
Band,
small
Straight pipe
Straight pipe
Flexible pipe
16
MD9030 only MD9030 MD9030 MD9030 only only only
Band,
large
Bent pipe
Shutter lever
Tornado tip
MD9030 only MD9030 only
MD9030 MD9030 only only