Logitech ZONE VIBE 130 Guia De Instalacion página 6

CONNECT YOUR HEADPHONES
a. Connect via USB-C receiver
1. Insert the receiver into the computer
USB-C port. Or insert the USB-C receiver
with the USB-A adapter to the USB-A port.
2. Zone Vibe 130 is already paired to the
receiver it ships with.
3. Once successfully paired, the LED light on
the receiver will turn solid white then dim.
b. Connect via BLUETOOTH
1. Slide the switch to the bottom in the arrow's
direction for 2 seconds to initiate pairing.
2. The LED light will flash white rapidly.
3. Open Bluetooth
settings on your device.
®
4. Select Logi Zone Vibe 130 in discoverable
devices.
5. Once successfully paired, the LED light will
turn solid white.
ADJUSTING HEADPHONES
1. Adjust the headphones by sliding earcups
up and down the extended part of the
headband.
2. It may be easier to adjust the headphones
on your head. Slide the earcups up
and down the headband until they sit
comfortably on your ears.
®
USB-C
USB-A
2 sec.
LOGI Zone
Vibe 130
6 English