Descargar Imprimir esta página

Pecron E2000 LFP Manual De Usuario página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

USING SOLAR PANELS TO CHARGE THE E2000 LFP
Using the pecron 200W /36V*6(1200W) to charge the E2000 LFP
pecron 200W*6
FAQS
Q1: What kind of battery is used in E2000 LFP? How long it can last?
A: E2000 LFP utilizes high quality UL certified automotive LiFePO4 battery, it can retain 80% of its original capacity at 3500
complete charge cycles.
Q2: What devices can E2000 LFP power?
A: E2000 LFP can power most devices with power consumption less than 2000 watts.
Q3: Can the E2000 LFP be used as UPS?
A: The UPS function is not supported.
Q4: Can the E2000 LFP be charged while discharging?
A: Yes, E2000 LFP can run devices while it is being charged. The battery will eventually run out if the discharging is greater
than the charging during the pass through charging.
Q5: How to calculate the E2000 LFP running time?
A: Running Time=Total Capacity(1920Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q6: Can I use the E2000 LFP indoors and charge the E2000 LFP indoors?
A: Yes, the E2000 LFP is safe to use indoors.
Q7: Does E2000 LFP have built-in MPPT controller?
A: Yes, there are two independent 600W(PV 32V-95V) MPPT charge controllers inside, and one step up 100W(PV 18V) MPPT
charge controller, The Voc ( Open Circuit Voltage) of the solar panels should not exceed 95V.
Q8: How to store the E2000 LFP?
A: Please turn off the unit and then store it in a dry, ventilated place at normal room temperature. Do not place this unit near
water sources or a wet/moist environment. For long-term storage, it is recommended to discharge the battery to 30%
every three months and recharge it to 60% to prolong the battery life.
DISCLAIMER
Please read the user manual thoroughly before using this product, and keep this manual in a safe place for future reference.
Failure to follow the instructions for proper set up, use, and care for the device can increase the risk of serious personal injury,
death, or property damage.
Once you use this device, you are deemed to have understood, recognized and accepted all terms and contents of this
document. The user shall be responsible for his own actions and all consequences arising from failure to use the device in
accordance with the "User Manual", or as authorized in Pecron's current product literature.In compliance with laws and
regulations, Pecron reserves all rights for final explanation, and to change these terms and conditions at any time without prior
notice. In the event that any revisions are made, the revised terms and conditions shall be posted on our website immediately,
please visit our website to inform yourself of any changes.
36V
36V
36V
36V
36V
36V
MC4 Solar Charging Cable*2
Y Branch MC4 Charging Cable(+)*2
Y Branch MC4 Charging Cable(-)*2
www.thetatauhome.com
36V
36V
36V is the operating voltage of the solar panels

Publicidad

loading

Productos relacionados para Pecron E2000 LFP