Publicidad
Idiomas disponibles
Idiomas disponibles
Cable Cover
Remove the Old Cable Cover
Remove the case cover seal located inside the cover and replace with
the new seal. Discard the old seal.
Unlatch the cable cover, lift out and discard.
Install the New Cable Cover
Set the new cable cover into the slots and snap closed.
Install the grommets into all unoccupied slots upon which the case cover
seal will connect.
Complete the Installation
Install the case cover using the new screws provided.
Reconnect the power supply.
1062950-9-A
Slot
Grommet
Cover Seal
Slot
2
Kohler Co.
Publicidad
