Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION!
with a pin. Changing the settings does not require the use of excessive force!
CAUTION!
range!
3.3.2.
CHANGING THE SENSOR CONFIGURATION
The sensor is adapted to work with devices with an open or closed electric
circuit. Before connecting the device to the timer sensor, check the type
of electrical circuit used. The rain sensor is programmed to work with a
closed circuit. To connect devices, insert the sensor plug into the timer
input.
3.4. Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
Do not spray the unit with a stream of water or immerse it in water.
c)
Perform regular inspections of the unit checking technical fitness and any
damages.
d)
Use a soft cloth for cleaning.
e)
Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
f)
Do not clean the unit with acidic substances, medical products, diluent, fuel,
oil or other chemicals as this may cause damage to the unit.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this unit are
recyclable according to their marking. You will be making an important
Make sure that the required value is correctly set and locked
In conditions of high humidity, avoid setting the minimum
Publicidad
