Descargar Imprimir esta página

RED CASTLE SPORT RC Manual De Instrucciones página 25

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
Do not use the car seat apron in the vehicle. In the
case of an emergency, this could impede the access
to the child.
Attaching the sun screen
• Position the wider part (shown at the top of photo
b1) onto the hood and attach the velcros.
• Pull the sun screen taut towards the lower part of
the seat and attach the velcros (photo b2).
The sun screen has been designed to reduce the
sun's glare and limit the effect of UV rays.
The use of this sun screen does not exempt you
from the need to protect your child.
We recommend the systematic use of a sun cream.
Regularly check that the child has enough to drink.
Care and washing instructions
• The car seat and the safety harness can be wiped
clean with warm, soapy water.
• Remove the seat cover to wash it. Slip the straps
and the buckle through the slots in the cover. To
replace it, make sure that the safety harness and
the edges of the cover are positioned correctly
(fig 8 A).
• Wash the seat cover in warm, soapy water (do not
machine wash). Rinse thoroughly and leave open
to dry. Do not iron. Do not use abrasive cleaning
products.
Important
safety information
• The RC/RCS car seat can be installed (rear facing)
on the front passenger seat (except in vehicles
equipped with a front airbag) or (rear facing) on
a rear passenger seat.
• Only use the RC/RCS car seat with a 3 point car
seat belt.
• Never leave your child unattended.
• Attach your child in all circumstances, always use
the restraining system
• The original equipment of the RC/RCS car seat
Group 0 must not be altered.
• For your child's safety we formally advise against
installing the car seat on a supermarket trolley.
• In the event of an accident, the car seat must no
longer be used and must obligatorily be changed.
It may have incurred damaged not visible to the
eye.
• When the car seat is used in the front of the
vehicle (on the passenger seat), the seat on
which it is installed should be as far back as
possible, the seat back should be upright and the
headrest as low as possible.
All manuals and user guides at all-guides.com
(Fig.8)
• Never use the car seat on any seat equipped with
an "airbag".
• The car seat must always be held in place by the
car seat belt, even when the car seat is not being
used. Unattached, it represents a danger for the
vehicle's occupants, were the vehicle to brake
suddenly.
• The car seat belt and the car seat safety harness
must not be twisted.
• When parked in the sun, the temperature rises
inside the vehicle. We recommend that you cover
the car seat (e.g. with a piece of fabric) so that
it will be more comfortable for baby when
placing him into the car seat. This will also
prevent metal parts from heating up and perhaps
burning him. It will also prevent the textiles
parts from discolouring.
• Never hold the child on your lap when in the
vehicle. Unattached, in the case of an accident,
he will be transformed into a "flying object ".
Never travel with your own 3 point set belt
attached around you and the child.
• Respect the Highway Code. Make sure that all of
passengers in the vehicle are wearing their seat
belts correctly attached.
• Do not place heavy objects on the rear window
shelf. Make sure that any luggage inside the
vehicle is placed in such a way that, in the event
of an accident, it does not injure either the baby
or any other occupants.
• Place the car seat in the vehicle with caution,
making sure that it is correctly installed. Always
check the wear and tear of the vehicle seat belt
and the car seat safety harness. Always also
check that no part of the car seat, its safety
harness, or the car seat belt is caught beneath
the passenger seat or in the car door.
• Never use the car seat without its original seat
cover. Use only the seat cover provided by the
manufacturer.
• When the car seat is combined on the stroller,
NEVER lift the stroller by the car seat but ONLY
by the stroller chassis.
• Keep this instruction manual close to hand at all
times for future reference.
• Do not remove the sewn on labels on the car seat
so as to avoid damaging the fabric.
• When used as a baby bouncer, this car seat does
not replace a crib or a cot. When the child needs
to sleep, he should be place in an appropriate
crib or cot.
• Do not use this car seat if any parts are broken or
are missing.
• Do not use any accessories or replacement parts
other than those approved by the manufacturer.
GB
24

Publicidad

loading

Este manual también es adecuado para:

Rcs