Trust START-LINE ACM-250-LD Manual Del Usuario página 56

TECHNICAL SPECIFICATIONS
Codesystem
Memory addresses
Size
Power
SUPPORTED LOAD
Incandescent and halogen lamps
12V halogen lamps with electronic transformer
12V halogen lamps with iron core transformer
Dimmable ESL/LED
Maximum 4 LED drivers. Not suitable for fluorescent tubes with starter switch, momentary switch and
compact fluorescent lamps. By slowly turning the rotary dial on the ACM-250-LD to a higher or lower
level, within a dimming mode, the dimming range of your lighting can be adjusted.
Note: The S contact is optional. This only needs to be connected when a wall switch is used.
Automatic
32
HxWxL: 15 x 40 x 45 mm
230VAC 50Hz
ACM-250-LD BUILD-IN DIMMER
20-250W
20-250W
40-250W
3-120W
48