ledscom LC-EL-151 Instrucciones De Montaje página 5

1. Disconnect the building-side connecting
cable from the power supply and secure it
against being switched on again. To do
this, trip the corresponding circuit breaker
of the house installation.
2. Drill a mounting hole with a diameter
between 63 mm and 78 mm using a hole
saw. Care must be taken to ensure that
existing lines are not damaged.
3. Connect the wires of the light according
to "Figure 1".
4. Now place the recessed luminaire in the
opening. The retaining springs should now
fix them automatically.
5. The installation is now complete. To put
the lamp into operation, select a
compatible GU10 bulb and insert it into the
porcelain socket.
Subject to technical changes
LEDs Com GmbH, Dohrweg 2a, D-41066 Mönchengladbach, www.leds-com.de, Tel. +49 (0) 2161 - 5 75 99 76
English
Figure 1
Recessed ceiling light (LC-EL-151) - Assembly instructions
03/2023