Publicidad
Idiomas disponibles
Idiomas disponibles
30/31
08. Installation
INCORRECT INSTALLATION OF THE MACHINE MAY CAUSE DAMAGE TO
PEOPLE, ANIMALS OR OBJECTS. THE MANUFACTURER CAN NOT BE
CONSIDERED RESPONSIBLE FOR THESE DAMAGES.
8.1 Transport and discharge
The equipment is delivered packaged. It must be transported and stored according to the
indications on the packaging. Due to the low weight of the remover can be moved by two people
without using other means.
8.2 Arrangement of the lighting system
The client must make sure that there is suitable lighting for the surroundings and that the lighting
conforms to the regulations in force. In particular, the client must arrange the positioning of
lighting that illuminates all the working area.
8.3 Arrangement of the pneumatic system
The client must arrange a line of filtered compressed air supplied by a compressor that is suitable
for the consumption required. Do not use compressed air that contains chemical products,
synthetic oil with organic solvents, salts or corrosive gases as they can cause damage or
malfunctioning. The line of compressed air must arrive up to the supply points of the machine.
If the compressed air contains a large amount of moisture, it may cause malfunctioning in the
valves and in the pneumatic components. Install a moisture separator downstream from the
compressor to avoid this.
8.4 Classification according to the ATEX directive
The machine conforms to the essential requisites of the EU Directive 2014/34/UE, better
known as ATEX ("Explosive atmospheres"). It is classified as group II category 3 letter G system.
The assessment procedures of conformity, carried out by an internal factory check, allow the
installation of the machine in surroundings where there may be potentially explosive atmospheres
due to the presence of gas, fumes or mist.
8.5 Equipment assembly
Main compressed
air line
Product
Air
YOU MUST ALWAYS CONNECT THE EQUIPMENT AND ALL THE
ELEMENTS INVOLVED IN THE WORK PROCESS TO A GROUNDING
CONNECTION TO ELIMINATE STATIC ELECTRICITY.
ENGLISH
Product
tank
Publicidad
